Retro surfboards come in a variety of shapes mainly with a Single Fin or Twin Fin set up.
The traditional single fin outline comes with an area pin tail or a single Flyer (wing) area pintail, with full boxy rails running into a beak nose.
The tail is foiled from the thickest section just in front of centre providing good flotation and making it easier to catch waves. The bottom shape has a very
small vee running throughout, with a slight increase through the fins.

The Specs for the Single Fin
Length: 5’ 9'' to 7’ 6''
Width: 19'' to 21''
Thickness: 2 ¾'' to 3''

The Twin Fin has the same boxy rails & beak nose as the single fin. The bottom shape while similar to the single fin has an increased vee through the fins as these boards are slightly wider. The twin fin model is available as a Swallow Tail, Flyer Swallow Tail (Single wing) or Double Flyer Swallow Tail (Double Wing)

The Specs for the Twin Fin
Length: 5’ 3'' to 6’6''
Width: 19½” to 21½''
Thickness: 2¾'' to 3''

With these boards you can really get into that 70’s feel with resin tints & washes, sprays & resin pin lines to give your board that special look that will turn heads as you walk to your favourite surf break.